Есть вопрос?
Зайди на форум

Поиск на сайте: Advanced

Denix - новый дистрибутив Linux. Русификация Ubuntu и установка кодеков

dkws.org.ua
Форум сайта dkws.org.ua
 
Главная    ТемыТемы    АльбомАльбом    РегистрацияРегистрация 
 ПрофильПрофиль   Войти и проверить личные сообщенияВойти и проверить личные сообщения   ВходВход 

Проблема с подключением мышки через Bluetooth в ASPlinux 11

 
Начать новую тему Ответить на тему    Список форумов dkws.org.ua -> Железо
 
Автор Сообщение
keyfour




Зарегистрирован: 23.11.2006
Сообщения: 1

СообщениеДобавлено: Чт Ноя 23, 2006 9:31 am    Заголовок сообщения: Проблема с подключением мышки через Bluetooth в ASPlinux 11
Ответить с цитатой

Проблема подключения мышки через адаптер Bluetooth на Usb порту.
ОС ASPlinux 11 ядро обновил до 2.6.17
Команда hciconfig показывает что адаптер присутствует
на порту hci0. Сканирование ничего не даёт. Пытаюсь вручную подключить, дабы Макадрес на мышке написан, ничего не получается.
И еще добился того что теперь адаптер видит мышку как Bluetooth Travel Mouse. Но мышка не работает...((
Вот модель адаптера: BTU01B незнаю кто производитель.
Вот модель мышки: Logitech M-RBB93

Вот вывод команд lsusb и dmesg при подключеном адаптере и включеной мышки (там еще у меня мобила на другом порту):
[root@localhost ~]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 1310:0001 Roper Class 1 Bluetooth Dongle
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

[root@localhost ~]# dmesg
Linux version 2.6.14-1.1653.1asp (build@amd64.asplinux.com.ua) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-Cool) #1 Mon Jan 23 19:24:56 EET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000002f7d3800 (usable)
BIOS-e820: 000000002f7d3800 - 0000000030000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
759MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 194515
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 190419 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fc970
ACPI: RSDT (v001 DELL D05 0x27d6061d ASL 0x00000061) @ 0x2f7d4425
ACPI: FADT (v001 DELL D05 0x27d6061d ASL 0x00000061) @ 0x2f7d4c00
ACPI: MADT (v001 DELL D05 0x27d6061d ASL 0x00000047) @ 0x2f7d5400
ACPI: MCFG (v016 DELL D05 0x27d6061d ASL 0x00000061) @ 0x2f7d53c0
ACPI: BOOT (v001 DELL D05 0x27d6061d ASL 0x00000061) @ 0x2f7d4fc0
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x2f7d465c
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x2f7d4461
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 40000000 (gap: 30000000:b0000000)
Built 1 zonelists
Kernel command line: root=/dev/hda8 reboot=b pci=noacpi pci=usepirqmask quiet rhgb resume=/dev/hda7
Initializing CPU#0
CPU 0 irqstacks, hard=c03fd000 soft=c03fc000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1496.545 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 765952k/778060k available (2125k kernel code, 11456k reserved, 732k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2997.11 BogoMIPS (lpj=5994239)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1075k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfba7e, last bus=13
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050916
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x1000-0x1005 could not be reserved
pnp: 00:01: ioport range 0x1008-0x100f could not be reserved
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:02: ioport range 0x1006-0x1007 has been reserved
pnp: 00:02: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:02: ioport range 0x1060-0x107f has been reserved
pnp: 00:02: ioport range 0x1080-0x10bf has been reserved
pnp: 00:02: ioport range 0x10c0-0x10df has been reserved
pnp: 00:07: ioport range 0x900-0x90f has been reserved
pnp: 00:07: ioport range 0x910-0x91f has been reserved
pnp: 00:07: ioport range 0x920-0x92f has been reserved
pnp: 00:07: ioport range 0x930-0x93f has been reserved
pnp: 00:07: ioport range 0x940-0x97f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: d000-dfff
MEM window: dfc00000-dfdfffff
PREFETCH window: d0000000-d01fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: dfb00000-dfbfffff
PREFETCH window: disabled.
PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Simple Boot Flag at 0x79 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1163866800.372:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key A8334AE0B4628F9E
- User ID: ASPLinux, Ltd. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.3 to 64
pcie_portdrv_probe->Dev[2666:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (30 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8032GAX, ATA DISK drive
hdb: HL-DT-STCD-RW/DVD-ROM GCC-4244N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 AZAL MODM PCIE RP01 RP02 RP03 RP04 RP05 RP06
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 172k freed
Write protecting the kernel read-only data: 325k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
b44.c:v0.95 (Aug 3, 2004)
PCI: Found IRQ 9 for device 0000:02:00.0
PCI: Sharing IRQ 9 with 0000:00:1d.2
eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:ac:ce:02
ndiswrapper version 1.5 loaded (preempt=no,smp=no)
ndiswrapper: driver bcmwl5 (Broadcom,12/22/2004, 3.100.46.0) loaded
PCI: Found IRQ 10 for device 0000:02:03.0
PCI: Sharing IRQ 10 with 0000:00:1d.1
ndiswrapper: using irq 10
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:14:a5:55:d8:67 using driver bcmwl5, 14E4:4318.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
PCI: Found IRQ 11 for device 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hw_random: RNG not detected
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
PCI: Found IRQ 11 for device 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.1
PCI: Sharing IRQ 10 with 0000:02:03.0
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000bf60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.2
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.3
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0388660(lo)
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ibm_acpi: ec object not found
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cdrom: open failed.
cdrom: open failed.
EXT3 FS on hda8, internal journal
Adding 1534168k swap on /dev/hda7. Priority:-1 extents:1 across:1534168k
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
i2c /dev entries driver
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ppdev0: claim the port first
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
[drm] Initialized drm 1.0.0 20040925
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1f.1
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0xc0020000) is not aligned on a size(0x640000) boundary
usb 4-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
pl2303 4-1:1.0: PL-2303 converter detected
usb 4-1: PL-2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
PPP Deflate Compression module registered
usb 2-1: new full speed USB device using uhci_hcd and address 2
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
Вернуться к началу
Посмотреть профиль Отправить личное сообщение
chip

Тысячник


Зарегистрирован: 22.04.2010
Сообщения: 2498

СообщениеДобавлено: Сб Мар 26, 2016 3:05 pm    Заголовок сообщения:
Ответить с цитатой

waleeed12 писал(а):
nice post,.....

Чт Ноя 23, 2006 9:31
Вернуться к началу
Посмотреть профиль Отправить личное сообщение
Champion1




Зарегистрирован: 05.04.2016
Сообщения: 1

СообщениеДобавлено: Вт Апр 05, 2016 9:18 am    Заголовок сообщения:
Ответить с цитатой

дабы Макадрес на мышке написан, ничего не получается.
И еще добился того что теперь адаптер видит мышку как Bluetooth Travel Mouse.?????
_________________
== Chess ==
Вернуться к началу
Посмотреть профиль Отправить личное сообщение
IkarIkar




Зарегистрирован: 27.02.2017
Сообщения: 7

СообщениеДобавлено: Пн Фев 27, 2017 10:37 pm    Заголовок сообщения:
Ответить с цитатой

Ох запарился с подобной проблемой когда-то
Вернуться к началу
Посмотреть профиль Отправить личное сообщение
Показать сообщения:   
Начать новую тему Ответить на тему    Список форумов dkws.org.ua -> Железо Часовой пояс: GMT
Страница 1 из 1
 Главная страница сайта
 
Перейти:  
Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете голосовать в опросах
© Колисниченко Денис